Parallel Flow Extruded Micro Multi Port Aluminium Tube for Radiator / Heat Exchanger / Automotive

• Usage: Refrigerator, Air Condition, Heat Exchanger, Condenser, etc.
• Type: Tube
• Temper: According to Customer′s Requirement
• Treatment: According to Customer′s Requirement
• Thickness: 0.22mm-0.5mm, Tolerance ± 0.015mm
• Surface State: According to Customer′s Requirement
• Model NO.: TR
• Rolling Characteristics: Finish Rolling
• Material: Aluminum Alloy
• Alloy: 4343/3003/4343
• Width Size: According to The Requirements
• Transport Package: Standard Export Package
• Specification: According to the customer request
• Trademark: Trumony
• Origin: Jiangsu
• HS Code: 76
• Production Capacity: 50, 000 Mt Per Year

Product Description

Micro-multiport tube is the high-tech aluminum products under the process of hot extrusion from refined aluminum ingot and then zinc spraying for anti-corrosion.

Micro-multiport tube is the core materials of new generation parallel flow air conditioning heat exchangers. It is outstanding in enviromental-friendly, efficient, energy-saving and cost reduction and was approved vividly in automobile air conditioning system. With restriction and prohibition of the application of the traditional refrigerant, it is a trend that household and commerical air conditioning heat exchanger needs revolution.

Chemical Composition
No	Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	V	Ti
01	1050	≤ 0.25	≤ 0.40	≤ 0.05	≤ 0.05	≤ 0.05	---	≤ 0.05	≤ 0.05	≤ 0.03
02	1100	≤ 0.95(Si+Fe)		0.05-0.20	≤ 0.05	---	---	≤ 0.10	---	---
03	1197	≤ 0.15	≤ 0.20	0.40-0.55	0.10-0.20	≤ 0.03	≤ 0.05	≤ 0.05	≤ 0.05	≤ 0.05
04	3102	≤ 0.40	≤ 0.70	≤ 0.10	0.05-0.40	---	---	≤ 0.30	---	≤ 0.10
05	3R03	≤ 0.15	≤ 0.15	≤ 0.01	0.90-1.10	≤ 0.03	≤ 0.03	≤ 0.05	≤ 0.05	≤ 0.05

 

Mechanical Properties
No	Alloy	Temper	Tensile strength	Yield strength	Elongation
01	1050	O/F/H111/H112	≥ 65	≥ 20	≥ 25
02	1100	O/F/H111/H112	≥ 75	≥ 20	≥ 25
03	1197	O/F/H111/H112	≥ 80	≥ 25	≥ 20
04	3102	O/F/H111/H112	≥ 75	≥ 20	≥ 25
05	3R03	O/F/H111/H112	≥ 80	≥ 25	≥ 20

Number	Inspection Item		Test according to
1	Raw & auxiliary materials testing	Alloy, specification	Raw & auxiliary materials testing standard HX/QP8.2.4-1-2012
		Surface quality
2	Casting	Chemical composition	Chemical composition of aluminum alloy (inner quality standard) HX/QP8.2.4-9-2007
3	Saw-cutting	Size	Aluminum alloy ingot inspection standard HX/QP8.2.4-2-2007
		Surface quality	Aluminum alloy ingot inspection standard HX/QP8.2.4-2-2007
4	Milling surface	Size	Aluminum alloy ingot after milling surface inspection standard HX/QP8.2.4-10-2009»
		Surface quality	Aluminum alloy ingot after milling surface inspection standard HX/QP8.2.4-10-2009
5	Welding	Size	Skin & core materials welding inspection standard HX/QP8.2.4-9-2009
		Welding quality	Skin & core materials welding inspection standard HX/QP8.2.4-9-2009
6	Heating	Temperature & time	Pusher-type aluminum sheet & ingot heating furnace operating standard HX/QP7.5.1-1-6-2007
7	Hot-rolling	Emulsion quality	Hot-rolling emulsion inspection standard HX/QP8.2.4-4-2007
		Size	Hot-rolling materials inspection standard HX/QP8.2.4-3-2007
		Surface quality	Hot-rolling materials inspection standard HX/QP8.2.4-3-2007
8	Cold rough-rolling	Thickness	Aluminum (cladded) strip & sheet & foil products inspection standard HX/QP8.2.4-7-2011
		Rolling oil quality	Cold-rolling procustion process lubricant inspection standard HXQP8.2.4-5-2007
		Surface quality	Aluminum (cladded) strip & sheet & foil products inspection standard HX/QP8.2.4-7-2011
9	Cold finished-rolling	Thickness	Aluminum (cladded) strip & sheet & foil products inspection standard HX/QP8.2.4-7-2011
		Surface quality	Aluminum (cladded) strip & sheet & foil products inspection standard HX/QP8.2.4-7-2011
		Rolling oil quality	Cold-rolling procustion process lubricant inspection standard HXQP8.2.4-5-2007
10	Tension-levelling	Surface quality	Aluminum (cladded) strip & sheet & foil products inspection standard HX/QP8.2.4-7-2011