Application: | Refrigerator, Air Condition, Automobile, Water Heater |
---|---|
Shape: | According to The Requirements |
Surface Treatment: | Mill Finished |
Grade: | 3000 Series |
Alloy: | Alloy |
Temper: | O - H112 |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Chemical Composition | ||||||||||
No | Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | V | Ti |
01 | 1050 | ≤ 0.25 | ≤ 0.40 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 | --- | ≤ 0.05 | ≤ 0.05 | ≤ 0.03 |
02 | 1100 | ≤ 0.95(Si+Fe) | 0.05-0.20 | ≤ 0.05 | --- | --- | ≤ 0.10 | --- | --- | |
03 | 1197 | ≤ 0.15 | ≤ 0.20 | 0.40-0.55 | 0.10-0.20 | ≤ 0.03 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 |
04 | 3102 | ≤ 0.40 | ≤ 0.70 | ≤ 0.10 | 0.05-0.40 | --- | --- | ≤ 0.30 | --- | ≤ 0.10 |
05 | 3R03 | ≤ 0.15 | ≤ 0.15 | ≤ 0.01 | 0.90-1.10 | ≤ 0.03 | ≤ 0.03 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 |
Mechanical Properties | |||||
No | Alloy | Temper | Tensile strength | Yield strength | Elongation |
01 | 1050 | O/F/H111/H112 | ≥ 65 | ≥ 20 | ≥ 25 |
02 | 1100 | O/F/H111/H112 | ≥ 75 | ≥ 20 | ≥ 25 |
03 | 1197 | O/F/H111/H112 | ≥ 80 | ≥ 25 | ≥ 20 |
04 | 3102 | O/F/H111/H112 | ≥ 75 | ≥ 20 | ≥ 25 |
05 | 3R03 | O/F/H111/H112 | ≥ 80 | ≥ 25 | ≥ 20 |
Number | Inspection Item | Test according to | |
1 | Raw & auxiliary materials testing | Alloy, specification | Raw & auxiliary materials testing standard HX/QP8.2.4-1-2012 |
Surface quality | |||
2 | Casting | Chemical composition | Chemical composition of aluminum alloy (inner quality standard) HX/QP8.2.4-9-2007 |
3 | Saw-cutting | Size | Aluminum alloy ingot inspection standard HX/QP8.2.4-2-2007 |
Surface quality | Aluminum alloy ingot inspection standard HX/QP8.2.4-2-2007 | ||
4 | Milling surface | Size | Aluminum alloy ingot after milling surface inspection standard HX/QP8.2.4-10-2009» |
Surface quality | Aluminum alloy ingot after milling surface inspection standard HX/QP8.2.4-10-2009 | ||
5 | Welding | Size | Skin & core materials welding inspection standard HX/QP8.2.4-9-2009 |
Welding quality | Skin & core materials welding inspection standard HX/QP8.2.4-9-2009 |
||
6 | Heating | Temperature & time | Pusher-type aluminum sheet & ingot heating furnace operating standard HX/QP7.5.1-1-6-2007 |
7 | Hot-rolling | Emulsion quality | Hot-rolling emulsion inspection standard HX/QP8.2.4-4-2007 |
Size | Hot-rolling materials inspection standard HX/QP8.2.4-3-2007 |
||
Surface quality | Hot-rolling materials inspection standard HX/QP8.2.4-3-2007 |
||
8 | Cold rough-rolling | Thickness | Aluminum (cladded) strip & sheet & foil products inspection standard HX/QP8.2.4-7-2011 |
Rolling oil quality | Cold-rolling procustion process lubricant inspection standard HXQP8.2.4-5-2007 |
||
Surface quality | Aluminum (cladded) strip & sheet & foil products inspection standard HX/QP8.2.4-7-2011 |
||
9 | Cold finished-rolling | Thickness | Aluminum (cladded) strip & sheet & foil products inspection standard HX/QP8.2.4-7-2011 |
Surface quality | Aluminum (cladded) strip & sheet & foil products inspection standard HX/QP8.2.4-7-2011 |
||
Rolling oil quality | Cold-rolling procustion process lubricant inspection standard HXQP8.2.4-5-2007 |
||
10 | Tension-levelling | Surface quality | Aluminum (cladded) strip & sheet & foil products inspection standard HX/QP8.2.4-7-2011 |
Suppliers with verified business licenses