The micro Multi Port Extrusion (MPE) is a highly refined quality product and is charac-terised by the following properties:
-Low weight
-Excellent conductor of heat and electricity
-High corrosion resistance
-High recycling value
-High surface quality
-High pressure resistance.
Our Aluminum Micro Channel Tube can be widely used for heat sink / transfer.
Like evaporator, air conditioner, condenser, heat exchanger, freezer, oven gas, boiler and so on.
The material can be 1050/1060/1070/3003/3102 or as customer's request.
Temper O-H112,H112,F.
We can do many kinds of sizes, such as 4.0x0.5mm, 6.0x1.0mm,7.0x1.0mm, 7.94x1.0mm,8x1.0mm,9.52x1.0mm,10x1.0mm,12.7x1.2mm,15.88x1.2mm,16.0x1.0mm, 9.05x1.5mm.
Aluminium galvanized MPE is the main component part
Of air-conditionings and the parallel flow evaporators and condensers of other
Refrigeration equipments.
The MPE was equipped in environment-friendly auto air-conditioning systems
Which use R134A as the refrigerant in European Union and China successively in
The year of 1996 and 2002. With a development of more than ten years, it has
Become a mature technology.
Aluminum Temper:
1000 series: 1035,1040,1050,1060,1070,1080,1090,1098,1100,1230,1435,1260,1170,1275,1285,1385
2000 series: 2001,2002,2011,2014,2017,2117,2218,2519,2024,2224,2025,2030,2031,2036,2090,2091
3000 series: 3002,3003,3004,3103,3203,3303,3105,3006,3007,3107,3008,3009,3015,3016
5000 series: 5005,5205,5006,5010,5013,5014,5016,5017,5040,5043,5050,5150,5251,5351,5451,5052,5083
5352,5552,5254,5754,5856,5456,5283
O,H12,H13,H14,H16,H18,H24,H32,H34,H19,H38,G36,F,H111,H112,H192,H392,H393,H321
T1,T3,T4,T8,T72,T451,T42,T62,T5,T6,T36,T351,T651,T851,T3511,T913,T94,T7351,T89,T4510,T6510,T8510,T8511,T4511,T52,T5511,T6511,T54,T73
| Mechanical property |
| Alloy Code |
Temper |
Tensile Strength Rm(Mpa) |
Yield Strength(Mpa) |
Elongation(%) |
| TR-010,TR-020,TR-030,TR-040TR-050,TR-110,TR-310,TR-116,TR-316,TR-111,TR-313,TR-121,TR-131,TR-141,TR-150,TR-151,TR-156Etc. |
O |
95-135* |
≥35* |
≥15* |
| H14 |
140-185 |
≥125 |
≥1.5 |
| H24 |
140-185 |
≥125 |
≥3 |
| H16 |
185-225 |
160 |
≥1 |
| H18 |
≥185 |
-- |
≥0.5 |
| TR-166Etc. Tube material |
H24 |
185-235 |
≥150 |
≥8 |
| TR-116,TR-316 Etc.tube material |
H14 |
140-185 |
≥125 |
≥3 |
| H24 |
140-185 |
≥125 |
≥8 |
| OD |
OD Tolerance |
ID Tolerance |
Roundness |
straightness |
Circular run-out |
| φ16-20 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
| φ20-30 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
| φ30-50 |
±0.05 |
±0.05 |
0.02↓ |
0.020↓ |
0.08↓ |
| φ50-80 |
±0.15 |
±0.10 |
0.05↓ |
0.025↓ |
0.10↓ |
Audited Supplier 
){kind=link}