• 1050 Micro Multiport Flat Aluminum Tube for Heat Exchangers
  • 1050 Micro Multiport Flat Aluminum Tube for Heat Exchangers
  • 1050 Micro Multiport Flat Aluminum Tube for Heat Exchangers
  • 1050 Micro Multiport Flat Aluminum Tube for Heat Exchangers
  • 1050 Micro Multiport Flat Aluminum Tube for Heat Exchangers
  • 1050 Micro Multiport Flat Aluminum Tube for Heat Exchangers

1050 Micro Multiport Flat Aluminum Tube for Heat Exchangers

Application: Heat Exchangers
Shape: Tube
Surface Treatment: Mill Finished
Grade: 1000 Series
Alloy: Alloy
Temper: O - H112
Samples:
US$ 500/Piece 1 Piece(Min.Order)
| Request Sample
Customization:

Contact Supplier

Ms. Tracy Lee
Commercial Manager

360° Virtual Tour

Diamond Member Since 2007

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
1050
Transport Package
Standard Export Packaging
Trademark
Trumony
Origin
China
HS Code
7607
Production Capacity
50, 000 Mt Per Year

Product Description

1050 Micro-multiport Flat Extrusion Aluminum Tube
 
Product Introduction:
Micro Multiport Extruded Aluminium Tube,is a kind of thin porous flat tubular material,which is treated by surface spraying zinc,using refining aluminum bar by hot extrusion.It is mainly used for the production of heat exchangers. Due to its high corrosion-resistance and good heat conductivity, MPE tube is particularly well suited for the use in evaporators and condensers.
 
Commonly used material chemical composition
No. Alloy Si Fe Cu Mn Mg Cr Zn V Ti
1 1050 ≤0.25 ≤0.40 ≤0.05 ≤0.05 ≤0.05 --- ≤0.05 ≤0.05 ≤0.03
2 1100 ≤0.95(Si+Fe) 0.05-0.20 ≤0.05 --- --- ≤0.10 --- ---
3 3102 ≤0.40 ≤0.70 ≤0.10 0.05-0.40 --- --- ≤0.30 --- ≤0.10
4 3003 ≤0.15 ≤0.15 ≤0.01 0.90-1.10 ≤0.03 ≤0.03 ≤0.05 ≤0.05 ≤0.05
 
Supply state and mechanical properties
Alloy Temper Tensile Strength Yield Strength Elongation
1050 O/F/H111/H112 ≥65MPa ≥20MPa ≥25%
1100 O/F/H111/H112 ≥75MPa ≥20MPa ≥25%
3102 O/F/H111/H112 ≥75MPa ≥20MPa ≥25%
3003 O/F/H111/H112 ≥75MPa ≥20MPa ≥25%
 
The corrosion resistance performance
Salt spray test ≥750hours
 
The pressure resistance performance
Automobile Condensers Household Condensers Evaporators
≥9MPa ≥13.5 MPa ≥3.5 MPa
 
Multiport Extruded Aluminum Tube(MPE)- which is used for automobile air conditioner condenser has larger internal section area, better effectiveness for heat transfer. At the same time, has the following characteristics:
1. Low weight
2. Good thermal and electricity conductivity
3. Excellent corrosion resistance
4. High cycle reuse value
5. High surface quality
6. Narrow tolerance range
 
Beside increased global performances, an all-aluminium brazed heat exchanger using MPE will also present better corrosion resistance. MPEs are primarily used for the following applications:
Condensers
Evaporators
Oil coolers
Radiators
Heater cores  

 
Package: In coil or Straight with fixed length.
Surface Treatment : With Zinc spraying or without Zinc spraying.

 

Send your message to this supplier

*From:
*To:
avatar Ms. Tracy Lee
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

Ms. Tracy Lee
Commercial Manager

360° Virtual Tour

Diamond Member Since 2007

Suppliers with verified business licenses

Manufacturer/Factory
Management System Certification
ISO 9001, ISO 14001, IATF16949
Export Year
2006-01-07