3003 / 3102 Micro-multiport Flat Extrusion Aluminum Tube
Product Introduction:
Micro Multiport Extruded Aluminium Tube,is a kind of thin porous flat tubular material,which is treated by surface spraying zinc,using refining aluminum bar by hot extrusion.It is mainly used for the production of heat exchangers. Due to its high corrosion-resistance and good heat conductivity, MPE tube is particularly well suited for the use in evaporators and condensers.
Commonly used material chemical composition
| No. |
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
V |
Ti |
| 1 |
1050 |
≤0.25 |
≤0.40 |
≤0.05 |
≤0.05 |
≤0.05 |
--- |
≤0.05 |
≤0.05 |
≤0.03 |
| 2 |
1100 |
≤0.95(Si+Fe) |
0.05-0.20 |
≤0.05 |
--- |
--- |
≤0.10 |
--- |
--- |
| 3 |
3102 |
≤0.40 |
≤0.70 |
≤0.10 |
0.05-0.40 |
--- |
--- |
≤0.30 |
--- |
≤0.10 |
| 4 |
3003 |
≤0.15 |
≤0.15 |
≤0.01 |
0.90-1.10 |
≤0.03 |
≤0.03 |
≤0.05 |
≤0.05 |
≤0.05 |
Supply state and mechanical properties
| Alloy |
Temper |
Tensile Strength |
Yield Strength |
Elongation |
| 1050 |
O/F/H111/H112 |
≥65MPa |
≥20MPa |
≥25% |
| 1100 |
O/F/H111/H112 |
≥75MPa |
≥20MPa |
≥25% |
| 3102 |
O/F/H111/H112 |
≥75MPa |
≥20MPa |
≥25% |
| 3003 |
O/F/H111/H112 |
≥75MPa |
≥20MPa |
≥25% |
The corrosion resistance performance
Salt spray test ≥750hours
The pressure resistance performance
| Automobile Condensers |
Household Condensers |
Evaporators |
| ≥9MPa |
≥13.5 MPa |
≥3.5 MPa |
Multiport Extruded Aluminum Tube(MPE)- which is used for automobile air conditioner condenser has larger internal section area, better effectiveness for heat transfer. At the same time, has the following characteristics:
1. Low weight
2. Good thermal and electricity conductivity
3. Excellent corrosion resistance
4. High cycle reuse value
5. High surface quality
6. Narrow tolerance range
Beside increased global performances, an all-aluminium brazed heat exchanger using MPE will also present better corrosion resistance. MPEs are primarily used for the following applications:
Condensers
Evaporators
Oil coolers
Radiators
Heater cores
Package: In coil or Straight with fixed length.
Surface Treatment : With Zinc spraying or without Zinc spraying.
Our Advantages
1.Founded since 2006, we have rich experience in this industry in China;
2.Good reputation in Aluminum materials field;
3.Have Ability of Design and Development.
4.We start our productions from aluminum ingot,so we can control the quality as well;
5.We have our own development department for new material research;
6.We have customers in over 50 countries and production in large scale, thus we have price advantage.
7.Good experience and cooperation with big client in the world;
8.With Certificate ISO9001-2008;
9.Sample order is acceptable
10.High performance cost ratio;
11.Fast delivery time;
12.Good communication skills, and good service and understandings for customers;
13.Non-toxic, odorless, impermeable.
4.We start our productions from aluminum ingot,so we can control the quality as well;
5.We have our own development department for new material research;
6.We have customers in over 50 countries and production in large scale, thus we have price advantage.
7.Good experience and cooperation with big client in the world;
8.With Certificate ISO9001-2008;
9.Sample order is acceptable
10.High performance cost ratio;
11.Fast delivery time;
12.Good communication skills, and good service and understandings for customers;
13.Non-toxic, odorless, impermeable.
14.We have ability and are honored to give good suggestions according to our experience.
15.More than 10 years' exporting experience, which helps us to solve urgent situations more correctly and quickily.
More About Us
1.We focus on
Aluminum products+ Multi-metal products+New products' design&development.
2.Our Management: Bringing Value to Customers.
3.Our Target: Bringing Technology to the Ground.
4.Our Action: Materials help Technolody become Reality.
5.Our Culture: Trust+Harmony=Trumony.
Audited Supplier 
){kind=link}
){kind=link}