Aluminum Coil Description:
1) Thickness: 5.0-7.0mm
2) Width: 800-1300mm
3) Alloy: 1050 1060 1070 1100 3003 3004 3105 8011
4) Temper: O H14 H24 H12 H22 H16 H26 H18 H32
5) Coil I. D.: 405 mm, 505 mm
6) O. D.: Depends on customer and loading request.
7) Use: The raw material of aluminum coil/sheet/plat/strip
Advantages:
All parts is self manufacturing, we have price advantage
Since 2004, we have rich experience in this industry in China
We start our productions from aluminum ingot, so we can control the quality as well
Sample order is acceptable
Strong and efficient international sales service
Good experience and cooperation with big client in the world
With Certificate TS16949, ISO9001-2008
Factory direct and on time delivery
Reply within 24 hours
Features
1. The luster is luminous
2. Non-toxic, odorless, impermeable
3. Withstand high heat and extreme cold
4. Minimize cleanup and ensure food fresh
5. Environment friendly, recoverable and recyclable
FAQ
Q: What is your terms of payment ?
A: Normally 30% TT in advance, balance paid before shipment.
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new moulds and free samples (within 5 kg),;
after confirmation, 25-30 days for mass production.
Q:OEM/ODM available?
A:Yes,we can!
Q: Can you assist in design?
A: Yes, we can! We have a strong and experienced design team.
Q:Could you provide sample?
A:Yes, We are honored to offer you samples for quality check.
Q:Is sample order accepted?
A:Yes,we accept sample order and we can provide design service!
Packing: |
card board wrapped and on wooden pallet |
HS Code: |
76061190 |
Trademark: |
Trumony |
Origin: |
china |
Min. Order: |
3.5 tons |
Transportation: |
CIF, FOB |
Chemical Composition |
No |
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
V |
Ti |
1 |
1050 |
≤ 0.25 |
≤ 0.40 |
≤ 0.05 |
≤ 0.05 |
≤ 0.05 |
--- |
≤ 0.05 |
≤ 0.05 |
≤ 0.03 |
2 |
1100 |
≤ 0.95(Si+Fe) |
0.05-0.20 |
≤ 0.05 |
--- |
--- |
≤ 0.10 |
--- |
--- |
3 |
1197 |
≤ 0.15 |
≤ 0.20 |
0.40-0.55 |
0.10-0.20 |
≤ 0.03 |
≤ 0.05 |
≤ 0.05 |
≤ 0.05 |
≤ 0.05 |
4 |
3102 |
≤ 0.40 |
≤ 0.70 |
≤ 0.10 |
0.05-0.40 |
--- |
--- |
≤ 0.30 |
--- |
≤ 0.10 |
5 |
3R03 |
≤ 0.15 |
≤ 0.15 |
≤ 0.01 |
0.90-1.10 |
≤ 0.03 |
≤ 0.03 |
≤ 0.05 |
≤ 0.05 |
≤ 0.05 |
Mechanical Properties |
No |
Alloy |
Temper |
Tensile
strength |
Yield
strength |
Elongation |
1 |
1050 |
O/F/H111/H112 |
≥ 65 |
≥ 20 |
≥ 25 |
2 |
1100 |
O/F/H111/H112 |
≥ 75 |
≥ 20 |
≥ 25 |
3 |
1197 |
O/F/H111/H112 |
≥ 80 |
≥ 25 |
≥ 20 |
4 |
3102 |
O/F/H111/H112 |
≥ 75 |
≥ 20 |
≥ 25 |
5 |
3R03 |
O/F/H111/H112 |
≥ 80 |
≥ 25 |
≥ 20 |